U bend tubes are commonly used to transfer heat in process fluids with large radiators. The fluid is pumped along a tube, then through a u-junction, and then back along a pipe parallel to the inflow line. Heat is transferred to the wrapping material through the wall of the tube. This design is used for industrial applications where a number of u-pipes can be poured into oil containers containing a high thermal capacity.
Heat treatment
Heat treat each pipe after bending according to customer requirements or relevant standards to release pressure, temperature and holding time
Bending Stainless Steel Tubing,U Bend Pipe,Bendable Copper Tubing,U Bend Tube Murphy Thermal Energy Co., Ltd. , https://www.murphyfinnedtube.com
1. Fixed center structure applied for thick wire processing
2. Cloes-loop controlling system for wire feeding length
3. Colorful touch screen, operating simply and directly
4. Collocating window strip stripping device, thick wire multi-points window stripping can be realized.
About us
1. Hiprecise Electronics keeps bringing in and training excellent specialists, providing outstanding products with higher quality and lower price, and distinguishing individual services to meet customers' different demands.
2. Hiprecise Electronics has been engaged in the application and service of electronic equipment in the wiring harness processing area for a long term, and we are the expert with 20 years' manufacturing experience and advanced technology, cooperating with companies in Japan, Occident and Taiwan area.
3. We provide an all-rounded solution to wiring harness processing area for customers from Home Electrical Appliance, Auto, Industrial Control Automation, Instrument, and Meter industries.
4. Our main products include Full-automatic terminal crimping machines, Digital wire cutting & stripping machines, Terminal crimping machines, Applicators for terminal crimping, Industrial robots, and other special wiring harness processing electronic equipment.
We will pay great attention to your any question or enquiry.
If you are interested in our company and products, pls don't hesitate to contact with us, we will offer our best price with good quality for you. We wish to create splendid achievements with you in the future.
   Model
DCS-470
 Cutting Length
0.5-99999mm
 Stripping Length
0.5-70mm depends on the length & materials of wires.
 Cutting Tolerance
≤ ± (0.2+0.002*L)
 Stripping Range
2.5-35mm² (AWG14-AWG2)
  Wire Material
PVC TEFLON, FIBERGLASS WIRE
   Power
220VAC ±10% 50/60HZ 1200VA
  Air Source
0.5-0.8Mpa
 DimensionsÂ
720mm(W)*480mm(L)*410mm(H)
  Weight
100kg
1. Fixed center structure applied for thick wire processing
2. Cloes-loop controlling system for wire feeding length
3. Colorful touch screen, operating simply and directly
4. Collocating window strip stripping device, thick wire multi-points window stripping can be realized.
About us
1. Hiprecise Electronics keeps bringing in and training excellent specialists, providing outstanding products with higher quality and lower price, and distinguishing individual services to meet customers' different demands.
2. Hiprecise Electronics has been engaged in the application and service of electronic equipment in the wiring harness processing area for a long term, and we are the expert with 20 years' manufacturing experience and advanced technology, cooperating with companies in Japan, Occident and Taiwan area.
3. We provide an all-rounded solution to wiring harness processing area for customers from Home Electrical Appliance, Auto, Industrial Control Automation, Instrument, and Meter industries.
4. Our main products include Full-automatic terminal crimping machines, Digital wire cutting & stripping machines, Terminal crimping machines, Applicators for terminal crimping, Industrial robots, and other special wiring harness processing electronic equipment.
We will pay great attention to your any question or enquiry.
If you are interested in our company and products, pls don't hesitate to contact with us, we will offer our best price with good quality for you. We wish to create splendid achievements with you in the future.
   Model
DCS-470
 Cutting Length
0.5-99999mm
 Stripping Length
0.5-70mm depends on the length & materials of wires.
 Cutting Tolerance
≤ ± (0.2+0.002*L)
 Stripping Range
2.5-35mm² (AWG14-AWG2)
  Wire Material
PVC TEFLON, FIBERGLASS WIRE
   Power
220VAC ±10% 50/60HZ 1200VA
  Air Source
0.5-0.8Mpa
 DimensionsÂ
720mm(W)*480mm(L)*410mm(H)
  Weight
100kg
Model NO.: DCS-470
Precision: High Precision
Demoulding: Automatic
Heating System: Electric
Function: Abrasion Resistance
Mould Life: >1,000,000 shots
Condition: New
Customized: Customized
Trademark: Hiprecise
Transport Package: Wooden Case
Specification: 1200mm ( L) *1600 mm ( W) *1200 mm ( H )
Origin: Xiamen, China
HS Code: 8537101990
Model NO.: DCS-470
Precision: High Precision
Demoulding: Automatic
Heating System: Electric
Function: Abrasion Resistance
Mould Life: >1,000,000 shots
Condition: New
Customized: Customized
Trademark: Hiprecise
Transport Package: Wooden Case
Specification: 1200mm ( L) *1600 mm ( W) *1200 mm ( H )
Origin: Xiamen, China
HS Code: 8537101990
Digital Wire Cutting Stripping Machine (DCS-470)