1.Welding materials
In
Welding, substances called filler materials or consumables are used. As the
name implies, these substances provide filler or a body of molten materials
that provides a strong bond to be formed between the base metals used. Most
welding processes will also require some form of shielding to protect both the
main components and filler from being oxidized during the process.
The
type of welding materials used during welding depends on the nature of the job
intended. Electrodes draw the necessary energy in order to perform welding
applications. Luoyang Golden Egret Company has any kind of welding materials
include CTC Welding Rod /rope, SCTC welding rod/rope, TC electronic welding rod,
Ni-based welding rod, flux-cored Welding Wires, solid welding wires and etc.
Welding
can be applied in different kinds of industries such as building and
construction, oil and gas, marine, power generation, steel, mine tools,
automobile, transportation and etc.
2. Welding rod
1)Cast tungsten carbide based tubular
rod
The
hard phase of the rod is cast tungsten carbide which leads to higher hardness
and better wear-resistance.
Wear
resistance: the wear resistance is 6-7 times better than others. Tested by ASTM
G65
Mainly
used for Mining machinery, Geological tools, Petroleum drilling tools etc, by
Oxy-Acetylene with weak carburizing flame.
Product
recommendation:
GT1103
(CTC, 60-80 mesh),
GT1103-1(CTC, 20-30 um),
GT1103-2(CTC,
40-60 um)
2)The hard phase of tube rod is carbide
pellets which leads to higher impact resistance and better wear resistance than
CTC cloase rod.
Wear
resistance: the wear resistance is 6-7 times better than others. Tested by ASTM
G65 wear test.
Mainly
used for mining machinery. Geological tools etc; by Oxy-acetylene with weak
carburizing flame.
Product recommendation:
GT2102 (Cemented carbide grit, 30-60mesh)
GT2102-2(Cemented carbide grit, 30-40mesh)
GT2102-3(Cemented carbide grit, 40-60mesh)
3)Tube rod is composited by Cemented carbide
pellets, Spherical CTC and CTC. The layer has higher impact resistance, better
wear resistance and good fluidity than other rods.
Wear resistance: the wear resistance is 6-7
times better than others. Tested by ASTM G65.
Mainly used for oil method drill bits, such as
Tri-cone bit, Steel tooth bit, PDC bit, etc. By Oxy-Acetylene with weak
carburizing flame.
Product recommendation:
GT3302 (carbide pellets, 20-40mesh)
GT3302-1(carbide pellets, 14-40um)
4)The hard phase of the rod is monocrystal WC,
the welding layer has a higher wear resistance and better impact resistance.
The wear resistance is 6-7 times better than
others, tested by ASTM G65 method.
Mainly used for the repair and strength for oil
drills bits, such as PDC bit diameter holding by Oxy-Acetylene with weak
carburizing flame.
Product recommendation:
GT4104 (Monocrystal WC, 80-200mesh)
3. Welding Rope
Made
form mixture of CTC and self-fluxing nickel alloy covering on nickel wire. The
CTC is in spherical or irregular with good wear resistance; the nickel alloy is
in spherical or nearly spherical shape with good wettability and erosion
resistance and better corrosion resistance than tubular rod.
Recommend
to use Petroleum drilling tools, Concrete mixing blade, Mud pump, Coal sluice,
Coal drill pipe, Tunnel drilling machinery etc.
By
Oxy-Acetylene Welding with weak carburizing flame.
Product
recommendation:
GS110450N
(CTC, 4mm, HRC 47-55)
GS110550N
(CTC, 5mm, HRC 47-55)
GS110650N
(CTC, 6mm, HRC 47-55)
4. Welding Bar
The
rod is sintered by CTC and Ni-based powders. The CTC(Cast Tungsten Carbide) is
in irregular or spherical shape with better wear resistance and the nickel
alloy is in spherical or nearly spherical shape and has good wettability with cast
tungsten carbide. The cladding layer has a higher impact resistance and better
wear resistance.
Its
wear resistance and corrosion resistance is between tube rod and flexible rope.
Mainly
used on the Steel PDC bit, Concrete mixer blade, Mud pump, Miner chute, Miner
drill stem and Mechanical parts of Tunnel rock drill machine etc.
Welded
by Oxy-Acetylene with weak carburizing flame.
Product
recommendation:
GD4025253-3(CTC, SCTC, 4*600/6*600)
GD4030303-3(CTC,
SCTC, 4*600/6*600)
5. Welding wire
Intensified molybdenum titanium vanadium
composite chromium carbide welding wire can improve layer`s bonding strength
and tenacity. This wire can use for multilayer welding which has no peel off,
and it can maintain good wear resistance under certain impact working condition.
Product recommendation:GSQD671Mo-4(1.6mm)
Medium carbon and high chromium wear resistance welding wire has a higher
hardness, stronger wear resistance, and excellent toughness by adding a certain
amount of molybdenum alloys and boride. It has a better impact resistance and
strip resistance than high chromium cast iron type materials
Product recommendation: GSQD621Mo-4(1.6mm)
With
high sphericity & excellent alloy organization, cemented carbide pellet is
mainly used in welding, as an adding material of PTA Powder , tubular welding
rod, to improve the wear resistance of the workpieces greatly.
Product recommendation: GQ06
Cemented
carbide grit with different percent of cobalt has good abrasive resistance and
is widely used for making grinding, polishing and cutting tools.
Product
recommendation: GS08A
Weld Materials,Tubular Welding Rod,Welding Electrodes,Stainless Steel Welding Rod Luoyang Golden Egret Geotools Co., Ltd , https://www.xtcmetalpowder.com
packaging :standard export wooden case
delivery time:shipping in 50days after paymentÂ
application:preform mold is installed on injection machine and used for producing preform,such as 5gallon preform,28mm pco 1810 mould,1881 preform mould, 38mm 2start preform mould,38mm 3start preform mould,48mm pet preform moulds,PP preform mould,beverage preform mould,water bottle mould,oil bottle preform mould,preform mould with valve gate,preform mould with short tail,preform with long tail,mineral bottle preform mould,edible oil bottle preform mould,3gallon preform mould,5gallon preform mould,preform with different weight,preform mould with 1 to 96cavities.etc.
name
description
preform type
without injection tail,no need cut
runner type
hot runner valve gate
core,cavity and neck material
S136stell(46-50HRC)
mould base
chrome plated P20(mati-rust)
cycle time
18 to23SÂ
off-center control range
+/-0.05mm
mould structure
self lock by each cavity,demoulding automatically
mould lifeÂ
5millong shotsÂ
manufacturing timeÂ
45 to 50days
design software
PROE,Cimtron,UG,AUtoCAD,CAM,UG ect
Hot runnerÂ
YUDO,SINO,HUSKY,and other famour brand
Mould Feature :
1.stell material: mould main parts adopt S 136 stainless stell ,with high glossy surface finish and hardness up to HRC46-5.mould base is chrome plated P20,and the chrome process helps avoid corrosion.
2.self-lock and shut-off individually for each cavity to guarantee high precision and less defect of the final preform production;and it iss aslo better for maintenance and mould life.
3.off-center adjustment system to ensure preform thickness different<0.05mm
4.hot runner valve gate applied,no need to cut preform tail and it woud save labor cost.
5.hot runner :one temperature zone controls one point teperature;it would preven the white defects on the preform.
aslo we have advanced processing equipments like moud CAM machining center,CNC engravig and milling machine,high presision electrical sparkle machine,large-sized milling machine.we will surely try our best reduce the cost of moulod accordig to your special requirements,and your mould will be ready in the shortes time through our effective project management.
Â
Model NO.: JX2018030431
Certification: CE
Customized: Customized
Surface Treatment: Mirror Polish
Design Soft: Proe Ug CAD
Cavity: Multi Cavity
Mould Base: P20 S136
Runner: Hot Runner
Transport Package: Wooden Cartons
Specification: 16cavity, 20cavity, 24cavity, 32cavity, 48cavity
HS Code: 8480490000
packaging &delivery