Australia, the United States and Austria: wireless communication base station lightning protection principles and engineering design (2)
Posted on
1.2 The introduction of lightning damage to the base tower and antenna feeder: The base station antenna of the mobile communication system is generally set up on a high tower. After the tower exceeds a certain height, the probability of lightning strike will increase significantly. According to the original CCITT "Lightning Protection Manual" The formula for the number of lightning strikes per year for the tower is: (times/year)
Where ng - ground lightning density; C - terrain coefficient, take 0.1 ~ 0.3 Peak Tower, take the open ground and steep slope when taking 0.3; otherwise take 0.1; in between take 0.2; non-top tower take 0.05 ~ 0.1, flat The tower takes 0; H - the average difference between the location of the tower and the surrounding ground within 1Km; h - tower height; D - average annual thunderstorm days.
1.3 The introduction of lightning damage to the site machine room: If the height of the equipment room is high, although lightning rod protection is provided, sometimes direct lightning strikes may occur from the horizontal and lateral sides, and so-called bypassing of lightning rods and side-by-side strikes to the facility. In particular, sometimes it is mistaken for the site machine room to be within the lightning rod protection range, but not installing or designing lightning protection belts on the roof (or roof) of a building to form a Faraday cage will increase the probability of side lightning strikes. In addition, housing metal doors and windows, indoor cabling, etc. are also important ways for secondary lightning sensing.
2. Design of site lightning protection grounding system
According to the principle of electromagnetic theory, comprehensive protection measures such as bleed-off, peak elimination, pressure equalization, and shielding can be used to control the impact of lightning on the wireless station to the maximum. However, these measures rely on the design of an effective lightning protection grounding system. The ground is a conductor. When the grounding electrode is in contact with the ground, it will form a geoelectric field, a ball area, and a resistance with the contact point as the center of the sphere. Therefore, the farther away from the grounding point (r is larger), the smaller the current can be transmitted through the electrode. Diffused rapidly to the earth. Generally, when the distance is more than 20m from the grounding point, there will be no pressure drop between the two points and it will become a true ground potential.
The main component of this
preparation is human immunoglobulin, which is prepared by cold ethanol
fractionation of human plasma from healthy donors. The manufacturing process
contains a step to remove anticomplementary activity and a dual viral
inactivation process. It contains a suitable amount of glucose or maltose as
stabilizer (see table below), but does not contain any antiseptic or
antibiotic. The distribution of IgG subclasses is close to the serum level of
normal subjects and maintains the bioactivity of Fc fragment of IgG.
[Indications]
1. Primary
agammaglobulinemia, such as X-linked hypogammaglobulinemia,
common variant immunodeficiency diseases, immunoglobulin G subclass deficiency,
etc.
2. Secondary
immunoglobulin deficiency diseases, such as severe infection, septicemia of
newborn, etc
3. Autoimmune diseases,
such as primary thrombocytopenic purpura, Kawasaki disease
Intravenous Injection Of Human Immunoglobulin,Intravenous Immunoglobulin,High-Quality Effective Intravenous Immunoglobulin,Human Immunoglobulin For Intravenous Injection