Plastic Mold,Pet Blow Mold ,Hollow Blow Molding Mold ,Pet Preform Mold Ningbo Chenwei Machinery Technology Co.,Ltd , https://www.chenweimachinery.com
CS-A barbed wire machine 1 set.
Twisting head 1 piece; Â
Sending wire rod 1 piece; Â
Crescent moon on the shaft 1 piece; Â
Hex socket wrench (tool) 1 piece,Â
Plane bearings 4 pieces; Wire spool 4 pieces;
Description:
1Barbed wire machine Model A is to produce normal twisted barbed wire .
2This machine consists of 2 parts.Main part and take-twisting part.
3 Four wires on the pay-off wire coils goes into machine.The behind 2 wires bound together form the middle strand wire.The wires on sides form the barbed wire through machine.Â
4Through taking-twist part,the strand wire and barbed wires tie together tightly.Â
5 The big red wheel can adjust the barb distance range from 3"4" 5" 6",others such as 4.5" need customized.
Advantage
1Barbed wire machine model A is high quality and not expensive.
2 Easy to set up,will apply video of machine installation and test.
3 Steel cover on driving shaft and machine cover for safety operation;
4 Saving materials and high capacity;
5Counter to count the number of barbs and calculate length of barbed wire.
6 Button switches and leveler to start and stop machine easily.
7 Quick and easy to take off roll from the machine
8 Guiding system to avoid wire snarls.
9 French Schneider low voltage electronics.
Technical Parameter
Â
Â
Unit
CS-A
CS-B
CS-C
Motor power
KW
2.2
2.2
2.2
Main drive shaft speed
r/min
402
355
355
Strand wire diameter
mm
1.6-3.0
2.0-3.0
1.6-2.8
Barb wire diameter
mm
1.6-2.8
1.6-2.8
1.6-2.8
Barb pitch
Inch
3"Â 4"Â 5"Â 6"
3"Â 4"Â 5"Â 6"
3"Â 4"Â 5"Â 6"
Twisted number
Â
3-5
Â
7
Raw material
Â
Galvanized steel wire ,stainless steel,black wire,
PVC Coated wire
Galvanized steel wire ,stainless steel,black wire,
Galvanized steel wire,stainless steel,black wire,
PVC Coated wire
ProductionÂ
Â
70kg/h,
20 meters/minute
40kg/h,
17 meters/minute
40kg/h,
16.5 meters/minute
Total weight
KG
1200
1000
1000
Dimension
mm
1950×950×1300
3100×1000×1150
3100×1000×1150
1760×550×760
Application: Â
   The machine can produce barbed wire which is extensively used in national defenses, military, railway, agriculture, animal husbandry and other industries.
Load
Our barbed wire machine has sold to many regions of world.Welcome your request and visit.
Service
Contact usÂ
Â
Model NO.: JIAKE CS-A
Output Capacity: 70kg/H 20m/Min
Tensile Strength: 300-600MPa(Customized)
Receiving Bobbin Wheel Support: Bigger 60kg Max Smaller 20kg About
Weight: 1200kg
Trademark: JIAKE
Specification: Main part size: 1950*950*1300mm
Origin: China
Automatic Barbed Wire Making MachineÂ