Carbon deposition is the deposition of incomplete combustion of helium in fuel and lubricating oils. The main components are the formation of hydroxy acids, asphaltenes, tar and other deposits directly related to the car's "fuel" and "lubricant". It is recommended that the vehicle owners perform the free-to-remove cleaning of the air intake system every 20,000 to 40,000 kilometers under the conditions that the conventional maintenance meets, that is, the inlet of the vehicle using a dedicated device-specific method without disintegration of the engine. The carbon deposition operation is performed at the sites where carbon deposition is likely to occur, such as valves, oil passages, and the like.

The effect of carbon deposit on the engine is more obvious when accelerating at low speeds, and how to deal with car carbon deposits quickly. First of all, we must pay attention to the high number does not mean high quality, that is, 97 oil is not necessarily less than the number 93 impurities, the label only represents the octane of the oil, and does not represent the quality and cleanliness. Impurities such as waxes and gums in gasoline are the main components that form carbon deposits. Therefore, gasoline with high cleanliness tends to form carbon deposits. Some car owners use gasoline cleaners in order to ensure the cleanliness of gasoline. However, the addition of gasoline cleaners must be careful. If you add counterfeit products, you will get the opposite effect. Then there will be a long idle engine. The time to reach normal temperature also becomes longer. After the gasoline is sprayed on the back of the valve, the evaporation speed is slow, and carbon deposition occurs. Also, run high speeds and try to increase the shifting speed of your car. Increasing the speed of shifting is also similar to that of multi-speed high speeds. The original shifting at a speed of 2,000 turns into a 2500 shift, which can not only effectively prevent carbon deposition, but also improve the dynamic performance of the car. Finally, pay attention to the timing of car kill. For cars equipped with turbochargers, do not stop the car immediately after driving at a high speed or climbing a hill. After 10 minutes of idling, stop the car. The car with a turbocharger has a higher rate of carbon deposition than a car. Naturally aspirated cars are several times faster.

Precision Stainless Steel Tube

Precision Stainless Steel Tube,Precision Stainless Tubing,Stainless Steel Precision Tube,Precision Metals Stainless Steel Tube

Changzhou MINI-ANT Precision Technology Co., Ltd. , https://www.czminiant.com