Recently, FAW-Volkswagen Automotive Co., Ltd. filed a recall plan with the General Administration of Quality Supervision, Inspection and Quarantine, and will recall some of the 2017 Audi A7, A8L and A4 allroad series cars from April 10, 2017. According to the company's statistics, there are 23 vehicles in mainland China. details as follows:
LINA Extrusion Pelletizer
Most of the polymer must be kneaded and then granulated before it is made into a final product. Sorted by pelletizing ways, LINA rubber & plastic granulator can be divided into four categories: 1. Hot-cutting and air-cooling pelletizing method. 2. Under-water granulating method. 3. Water-strand extrusion method. 4. Water-ring granulation method. LINA pelletizer can meet the granulation needs of high-viscosity and low viscosity rubber and plastic materials, as well as some new materials and chemical additives
LINA Water Ring Pelletizing Machine
LINA water ring granulator is actually die surface hot cutting and water cooling pelletizing line, whose cooling method is different with LINA hot cutting granulation line. Particles cut by rotary blade are taken by a water flow, but the water does contact with the die surface. The pelletizing method of water ring granulating is suitable for rubber and plastic polymers like EVA, HDPE and so on.
Advantage of LINA Pelletizing Line
1. The unit has the whole unit process chain, sound and light failure alarm and fast lock fault point and other control functions. All parts that are in contact with the material are made of stainless steel.
2. High accuracy of temperature control system to ensure the temperature sensitivity of the material.
3. It adopts the drop type separating method after cutting process, to avoid Particle agglomeration and ensure particle cooling.
4. Feeding system of the pressing machine adopts heater and reversing device to solve problem of power outage, material crash and cleaning.
5. Especially, the barrel and die head adopts advanced foreign techniques to ensure and control the dangerous occurred when the pressure is uncontrollable. The honeycomb filter plate is easy to clean and quickly change the mesh and the die head t easy to leak.
6. The hoist adopts automatic return technology to ensure the working efficiency.
7. The technological combination of dual-pull forced feeder and single screw not only meet the high requirement of secondary continuous mixing, but also solve the problem of time and power consuming of traditional working process.
Specifications of LINA Extrusion Granulating Line
Name
Mode
Capacity of Kneader
Screw length to diameter ratio
Screw diameter
Dimension
LINA Extrusion Pelletizing Line
LN-10/70
10L
12:01
70mm
2200*1000*1150
LN-10/75
10L
12:01
75mm
2650*1100*1250
LN-35/100
35L
12:01
100mm
3800*1090*1690
LN-55/120
55L
12:01
120mm
3800*1090*1690
LN-75/135
75L
12:01
135mm
3850*2350*3280
LN-110/150
110L
12:01
150mm
5100*2000*1500
LN-110/165
110L
12:01
165mm
5100*2000*1500
Water Ring Extrusion Pelletizer Water Ring Extruder,Water Ring Pelletizer,Water Ring Pelletizing Line,Water Ring Granulator Production Line LINA Machinery Industrial Co.,Ltd , http://www.linakneader.com
Part of the imported 2017 Audi A7 series car produced from September 8, 2016 to September 15, 2016, a total of 10 vehicles;
Part of the imported 2017 Audi A8L series of cars produced from October 11, 2016 to October 14, 2016, a total of 6 vehicles;
Part of the 2017 A4 allroad series of cars imported from August 11, 2016 to October 6, 2016, totaling 7 vehicles.
Some of the vehicles within the scope of this recall may have improper chemical distribution ratios in the airbags of the airbags or seat belts due to supplier manufacturing. In the event of a collision, the airbag may not be deployed properly or the front seats may be safe. The pretensioner cannot be tightened normally, posing a safety hazard.
FAW-Volkswagen Automotive Co., Ltd. will test the vehicles within the scope of the recall and replace the co-pilot airbags, the right curtain airbags, and the corresponding modules on the left side of the front seat belts free of charge according to the test results to eliminate defects.
Relevant users should drive carefully to avoid collisions. The user should contact the dealer for repair as soon as possible after the recall operation begins.
The recall is an enlarged recall of the recalls of Volkswagen (China) Sales Co., Ltd., SAIC Volkswagen Automotive Co., Ltd. and FAW-Volkswagen Automotive Co., Ltd. recalled some domestic and imported cars released on January 24, 2017. The reason for the expansion of the recall is that Audi Germany headquarters has received additional information from supplier Autoliv, and the passenger airbag, right curtain airbag or front left seat belt may also be involved in this problem.
FAW-Volkswagen Automotive Co., Ltd. will notify customers by registered mail. Users can obtain information about this recall by calling FAW-Volkswagen Automotive Hotline 4008-171-666. Users can also visit the website of the Inspection and Supervision Department of the General Administration of Quality Supervision, Inspection and Quarantine (jyjgs.aqsiq.gov.cn), the website of the AQSIQ Defective Product Management Center () and the WeChat Public Account (AQSIQDPAC) for more information. information. In addition, you can also call the Defective Product Management Center hotline or the local entry-exit inspection and quarantine agency's quality hotline: 12365 (switch No. 2), reflecting the problems in the implementation of the recall or submitting defects.
