Roof And Wall Panel Roll Forming Machine is the special equipment for continuous rolling and cold-forming on steel sheet.
It adopts PPGI,GI,AL-ZINC as the raw material, decoiling the coil, continuous rolling and cold-forming, automatically cut to the size and output the finished panel.
A Roof And Wall Panel Roll Forming Machine is designed to produce roof panels, roofing step tiles and wall cladding sheets with different models, like IBR roofing sheets, corrugated roofing sheets, trapezoidal roof panels, IDT roofing sheets, Russian type 1100 metal step tiles, klip-lok 406 and klip-lok 700, KR18/KR24 standing seam roofing, BEMO roof sheets, and concealed fixing roofing sheets etc.
The equipment adopts PLC control, AC frequency and adjusting the speed technology, and it realizes the continuous automatically production, therefore, it is really a new type of energy-saving and high-effective producing equipment for steel structure.
5. Producing speed can reach to 15-20m/min
Technical parameters of Roof And Wall Panel Roll Forming Machine
· Uncoiler: Manual uncoiler
· Inner diameter: 480-520mm
· Outer diameter: 1250mm.
· Loading weight 5TONS
· Rotation: Pulled by main roll forming machine
· Expansion: Manually
· Forming speed: 0-12m/min.
· Forming stations: 14-18 stations
· Machine base: welded with 36 # H beam-
· Material of Shafts 45# high quality steel
· Diameter of Shafts 70mm
· Material of Roller high quality 45#steel coated with hard chrome 0.05mm.
· Thickness of Siding Plate: 18mm
· Transmission by Chain-brackets
· Motor Power 5.5 KW
· Hydraulic Cutter of the roofing cladding sheet roll forming machine
· Material of blade Cr12 with quenched treatment 48-50.
· Hydraulic Powe 3 KW
· Cutting Length and Quantity Clients can set the required length and quantity on the PLC touch screen
· Control System of roofing cladding sheet roll forming machine
· Panasonic PLC Control, LCD screen, touch screen, frequency converter
· Voltage 380V/50HZ/3phase
· Automatically measure the length and quantity
Roof And Wall Panel Roll Forming Machine Roof And Wall Panel Roll Forming Machine,Corrugated Steel Sheet,Metal Roof Wall Panel,Color Steel Forming Machine Botou Golden Integrity Roll Forming Machine Co.,Ltd , https://www.jcxsteelrollformer.com
Advantages of Roof And Wall Panel Roll Forming Machine
1. Easy operation with HMI.
2.Save labor
3. Electric motor driven, with dynamos in every section
4. Different orders can be done.
Meishan iron ore beneficiation plant is designed to process ore of 2.5 million t, actually large-scale concentrator 1.65 million t, about 22% to 23% tailings separated from the ore every year, mainly from the tailings re-election operation The tail of the vibrating chute and the jig. Among them, +0.3mm is a dry coarse-grained tailings (commonly known as waste rock); -0.3mm is a wet fine-grained tailings (called tailings), which is mainly from the concentrated cone overflow of 2~0mm grain-grade ore; 2~ 0mm particle size jigging before re-concentration bucket overflow; magnetic separation concentrate permanent magnet dewatering tank overflow; 12 ~ 0mm grain grade concentrate grader overflow; tailings classifier overflow. The tailings yield is about 7% (accounting for the original ore), and the iron content is between 20% and 23%. The main components are magnetite, siderite, quartz , calcite , pyrite ore and kaolin . Table 1. Among them, the -0.074mm particle size accounts for about 80%, the iron is mainly distributed in the -0.074mm particle size, and the magnetic iron and iron carbonate content are 28.73% and 35.35%, respectively.
Table 1 Mineral composition of tailings (%)
mineral
magnetite
Siderite
Hematite
Pyrite
Calcite
Kaolinite
quartz
Feldspar
Apatite
dolomite
Quality score
10.3
16.05
5.6
5.2
13.42
13.72
15.42
7.0
1.0
9.7
In August 1991, the concentrator established a tailings re-election system to recover iron minerals in fine tailings by magnetic separation, and re-elect tailings with a strong magnetic separator (field strength of 191kA/m) (1 Times). After production, qualified iron concentrate with 57.8% iron and 0.4% sulfur can be obtained. The tailing grade can be reduced to below 19.39%, and the total tailings grade is reduced by 2%. According to the annual processing of 1.8 million tons of raw ore, it can recover 0.9 million tons of iron concentrate from abandoned tailings every year, with an annual economic benefit of more than 1.5 million yuan.