The selection of technical solutions for integrated wastewater treatment and reuse is very important. The selection principles and requirements are as follows: First, it is very important to scientifically determine the influent water quality and influent volume of the sewage treatment plant. It is the basis for the correct selection of the wastewater treatment process. Second, a comprehensive analysis of character and individuality comprehensive wastewater steel enterprises. Third, it is necessary to consider the comprehensive balance of quantity and quality of water used in the whole plant or process, such as water temperature, water volume, suspended solids and salt. Fourth, in order to realize the reuse of treated sewage for the production of supplementary water, in the advanced treatment of recycled water, according to the quality of sewage water, the treatment process of reducing the temporary hardening and the processing technology such as filtration and sterilization should be selected. 5. In the whole plant or regional large circulating water system, in order to maintain the high recycling rate of water, it is necessary to consider the key factors of the overall balance of water quality. Therefore, it is necessary to prevent salt enrichment in water and choose in wastewater reuse. Whether there is a desalination system or facility. Sixth, it is necessary to pay attention to the choice of quality and quantity of drugs. Seventh, to ensure water quality monitoring and operation control. The drainage of steel companies has its commonalities. The main pollutants in the effluent are suspended solids, oil, etc., the content, alkalinity and hardness are higher, the general BOD5/COD ratio is lower, the biodegradability is poor, and the biochemical treatment process can be ignored. Therefore, it is advisable to use physical-chemical water treatment such as pretreatment, coagulation softening, pH adjustment and filtration for this type of sewage. The drainage of steel companies also has its own personality. Due to different distribution areas and differences in production processes, the quality of sewage is the same and varies, and the composition and content of various pollutants vary widely. Therefore, for each plant, the treatment and reuse processes used are not exactly the same, and should be reasonably selected and adjusted according to the wastewater quality of each plant. The wastewater quality of iron and steel enterprises is complex, generally including the turbid circulation drainage of each process and the production wastewater of the auxiliary workshop. In the combined drainage pipeline, it usually includes domestic sewage and rainwater. Therefore, when selecting a comprehensive sewage treatment plan, the comprehensive water discharge and the drainage water quality and water volume of each enterprise should be collected and verified scientifically and reasonably. Otherwise, the integrated sewage treatment process does not combine the water quality and quantity of the production wastewater, and it is difficult to meet the actual requirements, resulting in difficulties in the operation of the treatment plant or the suspension of production and transformation, which often occurs in practice. Therefore, a reasonable determination of the influent water quality and quantity of the treatment plant is the basis of comprehensive wastewater treatment. This kind of parts are used for John Deere Chassis , The main parts of the chassis are: gearbox: transmission assembly, gear and shaft, shift fork shaft, shift pull rod, shift fork, transmission fastener. (2) Front axle: The accessories of differential transmission and steering control device are spring device, steering mechanism, steering horizontal tie rod, steering wheel, steering column tube, shell, hydraulic oil tank and connecting parts, hose. (3) The rear axle fittings include rear axle body and spring device with mounting parts. (4) Wheel = brake accessories include steel spoke wheel, drum brake, brake pallet, wheel brake cylinder, brake shoe with brake disc, brake cable, vacuum hose group for brake main cylinder, compensation tank, brake fluid, brake hard pipe, brake hose, brake booster, climbing hook brake, disc brake brake pliers, brake disc, repair components. (5) Hand-operated and foot-lever devices are fitted with shift-operated devices, damper cables, brakes, clutch pedals, clutch cables, accelerator pedals and accelerator cables. if you need the Chassis Parts, pls contact us freely ! Chassis Parts For John Deere,John Deere Transmission Parts for Sale,John Deere Undercarriage Parts,John Deere Front Axle Parts Hangzhou Holdwell Mechanical&Electrical Co.,LTD , https://www.dieselpart.nl