Function: Classification: Check valve is the valve relies on media flow to automatically open and close the disc, is used to prevent the media backflow, also known as check valve, one-way valve, reflux valve, and back pressure valve. Welcome to your inquiry anytime. Thanks
A carbon Steel Plate has usually been considered as the steel that does not contain much alloy steel elements, also named as mild steel. Generally, elements are C, Mn, P, S, Si, besides these, there are no minimum limits for elements of Al, Cr, Ni, Mo, V, etc.
Carbon steel plates are available in different grades depending on the carbon content and strength.
As the content of Carbon increase, the steel plate hardness increases.
Low carbon steel plate: For carbon content 0.06% to 0.25%, also we call it Mild Steel Plate.
Medium carbon steel plate: C content from 0.25% to 0.55%.
High carbon steel plate: 0.55% to 1.0%, also called hard steel plate.
Low carbon steel is the most common form, and it's very malleable and ductile. Medium carbon steel balances ductility as well as strength for excellent wear resistance. High carbon steel is exceptionally strong, while ultra-high carbon steel can be tempered to even greater hardness but no malleability.
As the percentage of carbon gets larger, steel can become harder and stronger through heat-treating. Carbon steel is usually heated to change the mechanical properties of steel, usually ductility, hardness, strength, and resistance of impact. Increasing the carbon content of carbon steel makes it harder and stronger, but reduces the steel`s ability to be welded, making it more brittle.
Carbon steel plate is most often used for structural purposes such as buildings, yet it has the flexibility to be worked into ornate designs. Low carbon steel sheet (wrought iron) is typically used for fences, chain links, gates, and railings. Structural steel (medium carbon steel) is used in cars, refrigerators, washing machines, buildings, and bridges. The steel sheets are normally made up of medium carbon steel.
Carbon Steel Sheet,Carbon Steel Sheet Plate,Low Carbon Steel Plate Shandong Guanzhou Iron and Steel Group Co., Ltd , https://www.shansteelsupply.com
Brass forged body, brass disc/ABS disc, Brass Bonnet, S/S filter is available for Vertical Check Valve
The valve is suitable for Flow non-retuning use. For Pump and water pipes instruction
1. Application: low pressures on condition that non aggressive fluids are used
2. Material: Forged Brass ( CW617N, CW614 ,CW602N,ASTM C37700)Â
3. Size: 1/2''-4''
4. Disc: Brass Disc silicon rubber seals or ABS disc NBR seals
5. Thread standard: ISO7/1, ISO228, NPT, DIN2999
6. Package details: Each valve by one polybag, inner box, cartons with wooden pallets.
Technical Specification:Â
Working Pressure
1.6MpaÂ
Tested Pressure:
2.0MpaÂ
Working Medium:
Water, non corrosive liquid(not include oil), saturated steam.
Working Temperature
-20° C≤ T≤ 150° CÂ
Check Valve is an automatic valve, its main function is to prevent the media backflow, prevent pump and drive motor reverse, and discharge the container medium. Check valve can also be used in pipelines that its pressure which may rise to exceed the system pressure auxiliary supply.
According to its structure and installed methods Check valve can be divided into
1.Swing Check Valve: Swing check valve disc is cylindrical disk-shape, around the seat channel axis to do rotational movement, due to inner channel is the streamline, the flow resistance is smaller than the lift check valve, apply to the low flow rate and seldom flow changes large-caliber occasions, but it should not be used for pulsatile flow, its sealing performance is less than lift type. Swing Check Valve is devided into single disc, double disc, multi disc. These three types are mainly according to valve diameter, for the purpose to prevent the media stopping flow or reflux, reducing the hydraulic compact.
2.Lift Check Valve: disc slides along the body vertical axis, lift check valve can only be installed in horizontal pipelines, the high-pressure small-diameter check valve upper disc uses ball. Lift-type check valve body shape is the same with globe valve (commonly used to the globe valve), so its flow resistant coefficient is larger. its structure is similar to globe valves, body and disc are the same with globe valve. upper disc and lower bonnet have guided sleeve, the disc guided sleeve can freely lift, when the medium downstream, the disc opens by media thrust, when the media stopped-flow, the disc relies on self-vertical landing on the seat, affected as preventing media backwash. Straight-through lift check valve inlet and outlet media channel direction is perpendicular to seat channels; vertical lift-type check valve, its media inlet and outlet channel direction is the same with the valve seat passage, its flow resistance is smaller than the straight-through type.
Model NO.: DW348
Flow Direction: Unidirection
Standard: GB
Application: Water Industrial Usage, Household Usage
Power: Manual
Media: Water
Temperature: Normal Temperature
Trademark: DW or OEM
Transport Package: Polybag, Inner Box, Carton and Wooden Pallets
Specification: 3/8′′-4′′
Origin: China
HS Code: 8481804090
Description: