| Shanghai dishwasher special silicon crystal tank | water treatment Jie Ling Jing

Shijiazhuang Yingdu Environmental Protection Equipment Co., Ltd.

| Silicone Phosphorus Crystal Jar for Shanghai Dishwasher | Water Treatment Jie Ling Jing Product Introduction

Silicon-phosphorus crystal jar is an indispensable device in the treatment of silicon-phosphorus crystal water. It is usually installed at the inlet end of pressure reducing valve, pressure relief valve, constant water level valve or other equipment to intercept the silicon-phosphorus crystal in the chemical-adding tank. Ball to protect the normal use of valves and equipment. When the fluid enters the filter cartridge with a certain size of filter, the sphere is blocked, and the clean filtrate is discharged from the outlet of the silicon-phosphorus crystal jar. When the cleaning is required, the silicon-phosphorus crystal is taken out as soon as it is processed and then reinstalled after processing. Yes, it is extremely convenient to use and maintain.

working principle

After the silicon-phosphoric crystal tank is connected to the pipeline system, water enters the tank from the lower water inlet, and water from the silicon phosphorus crystal sphere flows out of the water outlet. When the silicon-phosphorus crystal in the tank passes through the core, the volume is larger than the core. Holes are trapped in the core. The medicine in the tank generates Brownian motion through the impact of water flow. At this time, the medicine dissolves slowly in water and can exert its pharmacological effects.

Shanghai dishwasher special silicon-phosphorus crystal jar product features

1, compact structure, small size, easy site layout and installation. The sight glass on the tank can visually check the consumption of silicon and phosphorus crystals.

2. The structure of the inlet and outlet is divided up and down. The material and structure of the stencil maximize the flow area of ​​the water flow, effectively reducing the water resistance generated by the silicon-phosphorus crystal sphere, and ensuring that the operation is reliable without card, plug or plug.

3. When the equipment is installed, it can be carried out without stopping the production of the system. It will not affect the normal operation of the equipment and will not cause secondary pollution and save expenses.

Field of application

1, living facilities areas: all kinds of hot water boilers, central air conditioning, heat exchange systems, home central air conditioning, wall hanging boilers.

2, industrial general equipment: air compressor, refrigerator, heat exchanger, cooler and so on.

3. Application in special industries: anti-scaling, descaling, magnetization, sterilization and algae-killing of water equipment used in food, pharmaceutical and alcohol industries.

Shijiazhuang Jincheng Environmental Engineering Co., Ltd. welcomes your inquiries! Shijiazhuang Yingdu Environmental Protection Equipment Co., Ltd.

The silicon-phosphorus crystal scale water treatment system produced by our company is mainly composed of silicon-phosphorus crystal scale-inhibiting anti-rust water treatment agent and different specifications of YD series silicon-phosphorus crystal tanks. The silicon-phosphorus crystal tank water treatment system has the functions of antisepsis, scale inhibition, and sterilization. It is the only scale control equipment that can be used in drinking water and hot water boilers. jade

Powder Coating

Powder coating is a dry finishing process that has become extremely popular. Powder coating is used on a wide array of products. More and more companies specify powder coatings for a high-quality, durable finish, allowing for maximized production, improved efficiencies, and simplified environmental compliance. Used as functional (protective) and decorative finishes, powder coatings are available in an almost limitless range of colors and textures, and technological advancements have resulted in excellent performance properties.

Advantages over other coating processes

1. Environment friendly. Powder coatings contain no solvents and release little or no amount of volatile organic compounds (VOC) into the atmosphere.

2. More thicker coatings without running or sagging than conventional liquid coatings.

3. Perfect color consistency. Powder coated items generally have fewer appearance differences than liquid coated items between horizontally coated surfaces and vertically coated surfaces.

4. A wide range of speciality effects are easily accomplished using powder coatings that would be impossible to achieve with other coating processes.

5. Curing time is significantly faster with powder coatings compared to liquid coatings especially when using ultraviolet cured powder coatings or advanced low bake thermosetting powders.

Powder Coating Process

The Powder coating process involves three basic steps: raw material preparation or the pre-treatment, the powder coating application and curing.

Powder Coating Substrate Considerations

Before applying the powder coating material, you must first consider the substrate material that you will be coating. It is very important to have a clear understanding of the true composition of the surface of the part.

ALUMINUM:

ALUMINUM CASTING

COLD/HOT ROLLED STEEL

CAST IRON

BRASS

COPPER

ZINC

STAINLESS STEEL

Powder Coating Properties:

Powder Coating Colours

RALAL Range, Pantone Range, and other Natural Colour Systems (NCS)

If you have a Powder Coating Colour requirement that we do not stock we are usually able to source powders from the above ranges within 48 hours.

Powder Coating Gloss Level

Gloss is measured as a percentage.

1. Matt Powders are between 20% and 30% gloss.

2. Semi-gloss Powders are usually around 60-65% gloss.

3. Gloss Powders at least 80% and can be 85%.

Powder Coating finishes

1. Textured Powder Coating:

2. Ripple/Leatherette Powder Coating.

3. Hammerite Finish Powder Coating.

4. High Temperature Powder Coating.

5. Anti-Bacterial Powder Coating.

6. Clear or Tinted Powder Coatings.

Application Field

1. In automotive applications:

a) some primers used on bodywork have converted to powder. This has given improved coating quality and provided ecological advantages.

b) where a functional as well as a decorative finish is desirable powder coatings are being used increasingly eg.

i. - wheels,

ii. - bumper bars,

iii. - mirror frames,

iv. - oil filters,

v. - battery trays,

vi. - coil springs and

vii. - heads.

2. Appliances

a) Specially formulated, hard and scratch resistant powder coatings are replacing the energy-intensive porcelain finishes on washer tops and lids.

b) Powder coatings are being used on range housings, freezer cabinets, drier drums, and microwave oven cavities.

c) Outdoor furniture, farm and garden implements and garden tractors also are being finished with powder coating materials. - Interior fluorescent light reflectors are coated using a highly reflective, very thin powder coating.

d) Exterior lamp housings on highway and parking deck fixtures are coated with specially formulated powder which give ultra violet light protection and added corrosion protection

Powder Coating,Custom Powder Coating,Metal Powder Coating,Powder Coating Services

Suzhou FCE precision electronics Co., LTD , https://www.fukeyifcesz.com