Wear Plates Used to Prevent Freight Wagon

Posted on May 14, 2020

Model NO.: all kinds

Casting Form Material: Metal

Casting Form Usage Count: Semi-permanent

Surface Roughness: Ra3.2

Machining Tolerance: +/-0.10mm

Certification: ISO 9001:2000

Material: Steel

Used for: Trian Rail Component

Size: 16" Plate

Transport Package: Wooden Packing

Origin: China

Casting Method: Casting and Forging

Casting Metal: Cast Steel

Surface Treatment: Polishing

Coating: Zinc oxide

Standard: SGS

The Type: Single or Double Shoulder

Spec: Arema

Method: Hot Rolling

Trademark: Tedrail

Specification: 20T

HS Code: 8607990000

TIE PLATES FOR AREMA SPEICIFCATIONÂ
The use of single or double shoulder tie plates makes a more stable track and greatly lengthens the life of wood ties. Punched and sheared from hot-rolled steel sections, tie plates provide proper cant, uniform bearing surface for the ail and better load distribution to the ties. They hold the rail to gauge, providing more uniform wear to rail head and rotect against undue wear to ties. Tie plates are designed with a long end or field end to be located outside of the rails. In the case of single shoulder tie plates, the shoulder is placed on the field end of the plate. The gauge end or short end of the plate is located inside of the rails. When ordering ,identification of the rail section or the width of the rail base should be specified. Quality relaying tie plates are also available from our stocks which offer appreciable savings on railroad track age and industrial sidings.
uÂ Product Type: Single Shoulder Tie Plate / Double Shoulder Tie Plate
uÂ Production: Hot Rolled, Sheared and Punched
uÂ Specification: AREMA
uÂ Material: Low Carbon Steel - AISI 1020, 1030; High Carbon Steel - AISI 1045, 1060
uÂ Surface Cover: Black, Coating, Hot Dip Galvanized.
uÂ Type and sizes are listed on the following tables, WeightÂ based on 8-hole 7-3/4" wide plate, except plan 1 and 2; UP/CN 16" plate is 6-hole

AREMA Plan No. Part Type PUNCHING Single Shoulder(SS) Length Weight Rail Rail Base Width Â

Double Shoulder(DS) (Inch) (Pound)

1 10 Inch A & B SS 10 11.63 90 RA-A 5-1/8

2 11 Inch A & B SS 11 12.93 90RA-A 5-1/8

3 12Inch A & B DS 12 15.86 100RE 5-3/8

4 11Inch B DS 11 13.45 119RE/115RE 5-1/2

5 12Inch A & B DS 12 16.25 119RE/115RE 5-1/2

7 13Inch A & B DS 13 19.6 119RE/115RE 5-1/2

8 14Inch A DS 14 22.9 119RE/115RE 5-1/2

9 12Inch Â DS 12 14.94 140RE/136RE/133RE/132RE 6

10 13Inch A & B DS 13 17.87 140RE/136RE/133RE/132RE 6

12 14Inch A & B DS 14 21.47 140RE/136RE/133RE/132RE 6

13 14-3/4Inch A DS 14-3/4 23.32 140RE/136RE/133RE/132RE 6

UP/CN 16Inch Â DS 16 27.67 140RE/136RE/133RE/132RE 6

A tie plate is also called a baseplate or sole plate. Tedrail specializes in producing rail fastening and tie plate is one of our main products. Rail tie plate is used in rail construction to support the rails. We can offer rail tie plate made using either casting iron or casting steel for customers to choose from, depending on the load and the type of rails. Boltable as well as weldable clips can be applied. For the discontinuous type of support, we supply various ribbed tie plate which are also produced in casting iron or casting steel.
Tie plates are generally used to take the load of rail and distribute the load to the sleepers offering proven economies. We manufacture all types of base plates suitable for various rail sections, for use on wooden, steel or concrete sleepers and ballast-less tracks used with elastic fastenings on wooden sleepers and 'K' type fastening system.
Cast iron can be the welded or fabricated type, depending upon the customers' requirements. Our rail tie plate can be made to suit various rail section, i.e. UIC 60, UIC 54, RN 45, 90 A, etc.
Tie plate or sole plates are needed in rail installation, as they not only support the rails, but also enable the entire fastening system to be fixed on. Rail tie plates are the uppermost component of a crane rail or track support system. The primary function of a tie plate or sole plate is to provide the rail with a flat, smooth resting surface while allowing for vertical alignment of the rail system. Tie plates are secured by Anchor Bolts, also known as Holding Down Bolts. Soleplates are typically installed with a layer of grout cast beneath, which fills the void between the soleplate and the concrete foundation.
The holes for bolting the anchor and leveling bolts, and holes for bolt through clips if present, are precisely drilled into the sole plates. For weldable clips and base clips, the bottom of the clip is welded onto the sole plates before galvanizing.
We can manufacture any quantities big or small and try to accommodate our customers' requests, although it is more economical to manufacture larger quantities.
Below are some examples of rail tie plate we have manufactured over the last several years.

Type Dimension Holes Incline Rail Weight(Kg)

Rph 1/160 345/285/127/160x15/13 Ã˜ 26 (4x) 1:40 S 49/S 54 7,86

Rp 01/01/160 345/285/127/160x15/13 Ã˜ 26 (4x) 1:40 S 49/S 54 7,70

Rph 1/210 345/285/127x210x15/13 Ã˜ 26 (4x) 1:40 S 49/S 54 10,55

Rph 1/210 345/285/127x210x15/13 Ã˜ 36,3 (2x) 1:40 S 49/S 54 10,55

Rph 1/210 FVZ 345/285/127x210x15/13 Ã˜ 26 (4x) 1:40 S 49/S 54 10,69

Sph 1(a) 345/350/127x410x15/13 Ã˜ 26 (8x) 1:40 UIC 60 20,60

Rph 6/160 370/310/152x160x15/13 Ã˜ 26 (4x) 1:40 UIC 60 8,44

Rph 6/210 370/310/152x210x15/13 Ã˜ 26 (4x) 1:40 UIC 60 11,32

SZ 60 370/350/152x420x15/13 Ã˜ 26 (8x) 1:40 UIC 60 22,73

Rph 11 Ãœ 664/554x160 Ã˜ 26 (4x) 1:40 S 54 15,37

Rph 13 Ãœ 690/570x160 Ã˜ 26 (4x) 1:40 UIC 60 15,27

Rpo 5 345/285/127x160x15/13 Ã˜ 26 (4x) 1:20 S 49/S 54 8

Adhering to our quality first policy, Tedrail pays great attention to quality control management on our tie plate. We have been granted ISO9001-2008 certificates and have received the production license of China's Railway Ministry on railway products. We have a full set of inspection instruments to ensure all our rail tie plates are of high quality and up to customers' requirements.
As a leading manufacturer of rail fastening based in China, Tedrail also produces many other railway fasteners, such as track bolt, sleeper screw, rail joint bar, rail anchor, rail clip, elastic rail clip, SKL tension clamp, rail shoulder, and so on.
.

Jiangsu tedrail industrial co.,ltd is a high -tech enterprise intergrating railway passenger cars ,metro vehicles ,railway vehicle and rail fitting design and manufacturing .the company is committed to provide customers with the railway passengers transport system,railway freight system solutions ,the company has an experienced railway vehicle design team and ready to provide users with fast ,high-quality services at any time .the company products have been exported to the United States ,South Afric ,Brazil ,and other countries .covering the vehicle ,bogie and accessories ,coupler and accessories .gangway ,seat ,luggage rack ,air conditioning ,driver operation desk ,electrical cabinets ,electric connectors ,PIS system,FRP composite materials.
Â
The SHAANXI spare truck parts cover all the SHAANXI SHACMAN serial truk parts. Our main product cover: SHAANXI SHAMAN F2000/F3000/M3000/X3000/L3000 and etc. We can provide you the realiable quality and best price truck parts to maintance your after market service. Our main product:

- cabin assy and cabin accessory; Headlamp, taillamp, bumper, front cover, door and glass;

- Chassis Parts; sun gear, brake pad, clutch plate, bearing, differential, PTO, and axle;

- transmission parts; transmission shaft, universal joint, steering pump, clutch booster and brake pedal;

- Engine Parts; cylinder liner, piston, piston ring, oil seal, connection rod bearing, starter, injection pump, oil pump, water pump, air filter, oil filter and fuel filter;

- other spare parts. Curtain, roof, water tank, radiator, inter cooler and ect.

SHAANXI Chassis Parts
Shaanxi Chassis Parts,Drag Race Car Chassis,Shaanxi Chassis Car Parts,Shaanxi Auto Chassis Parts
Jinan JF Co., Ltd , https://www.jfsinotruk.com