The physical and mechanical properties of the heat-resistant covering layer  after tested should be in accordance with the following table: The minimum value Mpa after wearing out   The physical and mechanical properties of the heat-resistant covering layer  after tested should be in accordance with the following table: The minimum value Mpa after wearing out
Aluminum, vacuum-brazed, plate-fin heat exchangers can be custom-designed, as every requirement is unique. The cooling way of heat exchanger is by air so it's named air-cooled heat exchanger. As the name suggests, air cooled heat exchangers provide a cooling solution for fluids using air which is driven through a fin core by an electrical, hydraulic or mechanically driven fan. Air Cooled Heat Exchangers can be supplied to cool a single fluid, such as engine water, or a combination of fluids as part of a cooling pack which can often include multi fluid circuits cooled by a single fan.
Advantage of Aluminum Air Coolers:
Compact, Lightweight, High Efficient Heat Transfer
Aluminum Core : High strength, high heat conductivity,high safety coefficient.
Industrial Air Cooler,Air Separation Plate Fin Heat Exchanger,Air Cooled Heat Exchanger,Aluminum Air Coolers Wuxi Better Technology Co., Ltd , https://www.btheatexchanger.com
Heat resistant conveyor belt is mainly used to transport high-temperature materials, such as sintering ore, hot coke, clinker, hot casting and so on. According to the manifestation of the heat-resistant belt breakage, until to lose transportation ability and the heat-resistant grading, we use EPDM or SBR as the covering layer rubber, and high modulus low shrinkage polyester or cotton canvas as the strong layer. It can use the heat-resistant woven glass fabric between the cover rubber and the layers, so as to improve the working life of the heat-resistant conveyor belt. We can make it into endless conveyor belt as per clients' requirement.
Project
The type
T1
T2
T3
T4
Change the range
Hardness
Draw the intensity
20
20
20
20
Maximum after wearing out
85
Draw the intensity
12
10
5
5
 Performance rate of change /%Â
-25
-30
-40
-40
 Break person who extendÂ
 Performance rate of change /%Â
-50
-50
-55
-55
After aging rate of change /%
200
200
180
180
The heat resistance conveyor belt physical property of the cover rubber after heat test shall conform to the values specified in the table.
Item
type
type I
type II
type III
variable range
Hardness
Difference before and after ageing (IRHD)
±20
 Max. Value after ageing (IRHD)
85
Tensile strength
variable rate in performance   <=
25
30
40
Min. value after ageing Mpa
12
10
5
Rate of elongation at break
variable rate in performance% <=
50
55
Min. value after ageing
200
180
Cover Rubber Property
Grade
Tensile Strength (Mpa) >=
Elongation at Break(%)>=
Abrasion Loss(mm3)<=
D
18
450
200
L
14
400
250
D: Strong wear working conditions               L: General working conditions
Any interests pls contact :
Bonny Lee
Ph:+8615650198055
Tel:0532-68976970Â Â Â Fax:0532-68976953
Web: www.tigerubber.com
Â
Application:-
Heat resistant conveyor belt is mainly used to transport high-temperature materials, such as sintering ore, hot coke, clinker, hot casting and so on. According to the manifestation of the heat-resistant belt breakage, until to lose transportation ability and the heat-resistant grading, we use EPDM or SBR as the covering layer rubber, and high modulus low shrinkage polyester or cotton canvas as the strong layer. It can use the heat-resistant woven glass fabric between the cover rubber and the layers, so as to improve the working life of the heat-resistant conveyor belt. We can make it into endless conveyor belt as per clients' requirement.
Project
The type
T1
T2
T3
T4
Change the range
Hardness
Draw the intensity
20
20
20
20
Maximum after wearing out
85
Draw the intensity
12
10
5
5
 Performance rate of change /%Â
-25
-30
-40
-40
 Break person who extendÂ
 Performance rate of change /%Â
-50
-50
-55
-55
After aging rate of change /%
200
200
180
180
The heat resistance conveyor belt physical property of the cover rubber after heat test shall conform to the values specified in the table.
Item
type
type I
type II
type III
variable range
Hardness
Difference before and after ageing (IRHD)
±20
 Max. Value after ageing (IRHD)
85
Tensile strength
variable rate in performance   <=
25
30
40
Min. value after ageing Mpa
12
10
5
Rate of elongation at break
variable rate in performance% <=
50
55
Min. value after ageing
200
180
Cover Rubber Property
Grade
Tensile Strength (Mpa) >=
Elongation at Break(%)>=
Abrasion Loss(mm3)<=
D
18
450
200
L
14
400
250
D: Strong wear working conditions               L: General working conditions
Any interests pls contact :
Bonny Lee
Ph:+8615650198055
Tel:0532-68976970Â Â Â Fax:0532-68976953
Web: www.tigerubber.com
Â
Supersonic Cleaning: High efficiency,little corrosion to metal , few pollution.
Vacuum Brazing : Strict control of vacuum degree, temperature and time.
Argon Welding : Weld Gaps straight appearance , squamous uniform.
Test : Air tightessn test , Hydraulic Pressure
Model NO.: Fire Resistant
Certification: ISO.SGS.Iaf.CNAS.
Color: Black
Width  : ISO.SGS.Iaf.CNAS.
Warranty : 6 Months
Elongation at Break: 350% ~ 400%
Thickness of Bottom Rubber: 1.5 mm ~ 4.0 mm
Abrasion Loss: 90 mm3 ~ 200 mm3
Strength: 100 N/mm ~ 4000 N/mm
Thickness of Top Rubber: 3.0 mm ~ 8.0 mm
Trademark: TIGER RUBBER&AS AMENDED
Transport Package: PP Bags, Reel, Cage
Specification: Standard specification or customized
Origin: Qingdao, China
HS Code: 4010120000
Model NO.: Fire Resistant
Certification: ISO.SGS.Iaf.CNAS.
Color: Black
Width  : ISO.SGS.Iaf.CNAS.
Warranty : 6 Months
Elongation at Break: 350% ~ 400%
Thickness of Bottom Rubber: 1.5 mm ~ 4.0 mm
Abrasion Loss: 90 mm3 ~ 200 mm3
Strength: 100 N/mm ~ 4000 N/mm
Thickness of Top Rubber: 3.0 mm ~ 8.0 mm
Trademark: TIGER RUBBER&AS AMENDED
Transport Package: PP Bags, Reel, Cage
Specification: Standard specification or customized
Origin: Qingdao, China
HS Code: 4010120000
Application:-