Geometric Printed Fabric,Colorful Geometric Print Fabric,New Design Geometric Print Fabric,Latest Geometric Print Fabric SHAOXING HONEST IMP&EXP.CO.,LTD , https://www.transfer-printed.com
Some netizens asked: My car has started to skin since it opened less than 20,000 kilometers. Why does a good tire lift from the skin? What is the reason for tyre skinning?
A: The phenomenon of tire peeling is common now, causing many reasons for tire skinning. The following are some basic reasons for tire peeling:
1. Selection and installation of tires The correct installation of the tire affects the service life of the tire. When changing the tire, the actual size and load capacity of the various tires are different due to the different types and patterns. Do not arbitrarily mix the tires.
2. The working pressure of the working pneumatic tire is too high or too low, which will affect the service life of the tire. Therefore, the internal pressure of the tire is a problem that the owner needs to pay attention to.
3. Tire load The tires produced by regular enterprises have load indices. Under overload conditions, the greater the vehicle load, the shorter the service life of the tires.
4, the speed of regular tires produced by regular manufacturers have a speed level index, tires will be easier to play too fast.
5, tire temperature tire temperature is too high, it can easily lead to the skin from the tire. More serious punctures occur.
6. Road Conditions If the vehicle is running on gravel roads or under harsh road conditions for a long time, the service life of the tires will certainly be reduced.
How to reduce tire wear and prevent tire skin?
The first move: The car stays in the shade, although running on the road will bring a sharp increase in the temperature of the tire. But don't ignore the parking time. Under static conditions, tire tread walls are not evenly loaded and heated. In such cases, it may cause rubber cracking in local areas or damage to internal structures.
The second measure: Do not rush to accelerate the rapid deceleration In high temperatures, rapid acceleration and rapid deceleration, will cause tire temperature, tire pressure rose rapidly. In some extreme cases, flat spots may even appear on worn rubber. Moreover, the tire walls will also have a greater impact at this time. It is actually quite dangerous.
The third measure: Do not stop when the car wash surface temperature reached 50 degrees Celsius, the tire temperature may be higher than 10 degrees. In this case, a parking lot is flushed with cold water, which accelerates the aging of the rubber. Sometimes the brake disc will be deformed. Many people often do not know what kind of situation has caused damage to the vehicle.
The fourth measure: check tires, reasonable tire pressure General tire pressure is normal in the 220-260 kPa, but in the summer, need to pay attention to tire pressure conditions. Especially for longer service tires. It is recommended to place the tire pressure at 220-240 kPa. Even if the change in temperature causes the tire pressure to change, it is not enough to break the tire.
The fifth measure: Use the tires that are suitable for the season If your original tires have been used for a long time, it is usually necessary to replace them for 5 years. It is advisable to pay attention to the pit of the tire under maintenance. If it has worn out to the marking line, it must be replaced. Do not save fortunes.
Finally: Many tire manufacturers use synthetic rubber more for cost savings. As a result, the proportion of natural rubber and synthetic rubber mixed in the tire is lost, shortening the life of the tire, and even causing cracking and peeling. Look carefully before buying.