Found on publicsurplus.com: Auction #3565017 – 2002 KME Panther Fire Engine Current Price: $2,000.00 This is a well-maintained reserve fire engine (pumper) that meets NFPA standards. It features a 500-gallon water tank and a 1,500 GPM Hale centrifugal fire pump (Model QMAX150-211; Serial No. 80000). The pump is engaged without PTO. The unit has been in reserve service since 2007. The all-aluminum cab and body show some wear, including scratches, paint bubbling, and discoloration on the diamond plate. There is also some pitting in certain areas. All compartment doors are roll-up style with Pac-Trac for equipment storage. The engine comes with three ladders: a 24' 2-fly extension ladder, a 14' roof ladder, and a 10' folding attic ladder. It also includes two 10' sections of 6" hard suction hose (totaling 20'). Additional equipment includes a Motorola VHF radio and a Signatronic headset for communication in the cab. Please note: No fire attack or supply hose is included in the sale. Frankfort FPD photo Thanks, Rob
Thermoforming is a manufacturing process used to shape plastic sheets into various custom design products. It involves heating a plastic sheet until it becomes pliable, then using a mold or a vacuum to form it into the desired custom shape.
Thermoforming and vacuum forming are both processes used to shape plastic sheets into specific forms. However, there are some differences between the two techniques:
Thermoforming is a versatile process that is widely used in industries such as packaging, automotive, aerospace, and medical. It offers advantages such as cost-effectiveness, quick turnaround times, and the ability to produce complex shapes with high precision.
Custom Thermoforming,Thermoforming Plastic Products,Thermoforming Process,ABS Thermoforming Dongguan Yiyongli Industrial Co.,Ltd. , https://www.absthermoforming.com
(Reserve not met yet)
Time Left: 18 days 3 hours
Highest Bidder:
Auction Started: July 11, 2024 at 10:54 AM MDT
Auction Ends: July 31, 2024 at 02:00 PM MDT
Frankfort Fire Protection District [View seller’s auctions]
1. Process: In thermoforming, a plastic sheet is heated until it becomes pliable, and then it is pressed against a mold using pressure or a vacuum. Vacuum forming, on the other hand, relies solely on the use of a vacuum to draw the heated plastic sheet onto the mold.
2. Mold complexity: Thermoforming is typically used for more complex shapes and intricate molds, as it allows for greater detail and precision. Vacuum forming, on the other hand, is better suited for simpler shapes and molds that do not require as much detail.
3. Material thickness: Thermoforming is often used for thicker plastic sheets, typically ranging from 0.030 to 0.250 inches in thickness. Vacuum forming is more commonly used for thinner plastic sheets, typically ranging from 0.005 to 0.060 inches in thickness.
4. Production volume: Thermoforming is generally more suitable for high-volume production due to its faster cycle times and ability to handle larger sheets of plastic. Vacuum forming is better suited for low to medium volume production, as it has slower cycle times and is limited by the size of the vacuum forming machine.
5. Cost: Thermoforming typically requires more expensive equipment and molds, making it a more costly process compared to vacuum forming. Vacuum forming, on the other hand, is a more cost-effective option for smaller production runs or prototypes.
Overall, thermoforming is a more advanced and versatile process that offers greater precision and complexity, while vacuum forming is a simpler and more cost-effective option for less complex shapes and smaller production volumes.
Date
Note: This auction might be extended
Seller