Aluminum Coil is widely used in different industry.We use aluminum polished coil in those application which require high quality of the surface condition.Such as cosmetic packing,LED lights,handbag or some electronic or automobile parts.Aluminum coil is easy to pack and transport and Trumony controls aluminum polish coil with strict internal control standard which makes sure our clients can use this aluminum polished coil with high production yield.Trust in harmony,we care what our clients care. Polished Coils,3003 Aluminum Coil,1050 Aluminum Coil,Aluminum Polished Coil Trumony Aluminum Limited , https://www.szaluminumtube.com
Splitter type
The optical splitter is a component of the PON network. It is a passive device that connects the OLT and the ONU. Its function is to distribute downlink data and concentrate uplink data. The optical splitter has an upstream optical interface and a plurality of downstream optical interfaces. The optical signal from the upstream optical interface is allocated to all downlink optical interfaces for transmission, and the optical signal from the downstream optical interface is transmitted to the upstream optical interface of only Yi. When the optical signal is transferred from the upstream optical interface to the downstream optical interface, the optical signal strength/optical power will decrease, and the same is true when the optical interface is switched from the downstream optical interface to the upstream optical interface. The optical signal strengths of the downlink optical interfaces may be the same or different.
Working principle: When a single-mode fiber conducts an optical signal, the energy of the light is not completely concentrated in the core, and a small amount is propagated through the cladding near the core, that is, in the two fibers. When the core is close enough, the mode field of the light transmitted in one fiber can enter another fiber, and the optical signal is redistributed in the two fibers.
Beam splitter calculation
• Optical power loss is related to the number of light branches (~3.5dB loss per 1â„2 split)
• The amount of loss of optical power determines the distance that can be transmitted
• Bandwidth vs. Cost: The average available bandwidth per household depends on the size of the optical split ratio. The higher the split ratio, the lower the cost per OLT.
The optical splitters are mainly divided into two categories according to the manufacturing process: FBT type (fused cone type beam splitter) and PLC type (planar optical waveguide power splitter).
The fusion taper technology bundles two or more optical fibers together and then melts and stretches them on a taper. During the stretching process, the optical fiber coupling split ratio is monitored. After the splitting ratio reaches the requirement, the melt stretching is completed, one end of which remains. One fiber (the rest is clipped) is used as the input and the other end is used as the multi-output.
The planar optical waveguide technology is based on optical integration technology. The optical waveguide branching device is fabricated by a semiconductor process, and the function of the shunt is completed on the chip.
According to the scope of application, it can be divided into: box type beam splitter, tray type beam splitter, rack type beam splitter, wall-mounted beam splitter, and the like. The box type beam splitter is mainly used in the ODF frame of the machine room, and the cable is transferred in the box. The tray type splitter can only be installed in the ODF rack or the cable transfer box of the equipment room. Rack splitters can only be installed in a standard rack. Wall-mounted beamsplitters are mounted on the wall and can be installed in corridors and corridors.