Size : 1/8″ NB TO 24″ NB
Grade : Incoloy 800 (UNS N08800), Incoloy 800H/HT (UNS N08810), Incoloy 825 (UNS N08825)
Standard : ASTM A564 / ASME SA564
Dimensions : ANSI/ASME B16.5, B 16.47 Series A & B, EN-1092, BS4504, BS 10, B16.48, DIN, etc.
Types : Weld neck Flanges (WNRF), Slip-on Flanges (SORF), Blind Flanges (BLRF), Lap Joint Flanges (SOLJ), Socket-weld Flanges (SWRF), Screwed (Threaded) Flanges, Long weld neck Flanges (LWNRF), Spectacle Blind Flanges Spacer & Blind Flanges, Ring Type Joint Flanges (RTJ), Reducing Flanges, Raised Face (RF) Flanges, Orifice Flanges, Large Diameter Flanges, Custom Flanges, Drawing Flanges, Forged Flanges, Plate Flanges, Flat Face Flanges, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, API, EN Flanges etc.
Class / Pressure: 150#, 300#, 600#, 900#, 1500#, 2500#. PN6, PN10, PN16, PN25, PN40, PN64 etc.
Incoloy Flange,Incoloy Blind Flange,Incoloy Forging Flange,Incoloy Forged Flange Zhejiang Max Stainless Steel Co.,Ltd , https://www.cnstainlesstube.com
2. For the unit project and permanent equipment that have been used, according to the principle of who uses, who keeps, and who maintains, the unit is responsible for maintaining and updating the worn parts of the brush painting before the handover to production. The permanent house should be painted and cleaned as before. Transfer to the contractor or construction unit.
(II) Storage and withdrawal management 1. For equipment and tools that are not required to be installed to be kept by the contractor, when the equipment and tools arrive, the contractor shall be responsible for the acceptance of the personnel warehouse, prepare the inventory, and fill it for safekeeping. The bills shall be properly kept, and the construction unit and the contractor shall sign the custody contract in advance and pay a certain percentage of the custody expenses of the original price of the equipment and tools.
2. If the equipment and tools that do not meet the actual needs due to design changes, the warehouse shall be promptly returned and returned to the contractor or the construction unit. If it is required to be kept by the contractor, it shall be handled as described above.
Incoloy Flanges Specification:
ANSI/ASME
B16.5, B 16.47 Incoloy Flanges, Incoloy UNS N08800 Slip On Flanges,
Incoloy UNS N08810 Blind Flanges, Incoloy Forged Flanges, UNS N08825
Orifice Flanges, Reducing Flanges
(1) General requirements 1. After the completion of the permanent unit project, it is necessary to organize the inspection and acceptance, and fill in the unit project acceptance form. The contractor shall sign the use contract for the use of the completed unit project, and clarify the responsibility for maintenance and repair and the expenses. The re-inspection and handover shall be carried out when the construction project is completed and handed over; the unit maintenance and care of the unit project that has not been completed shall be ensured to be intact.