Posted on

Nothing is more important than safety at work. Therefore, we must make appropriate preparations before work to prevent accidents. Then what are the preparations for gasoline generators before they are used?
1. To avoid electric shock, please use a good ground wire when using this unit.
2. Please use unleaded gasoline of 90# or above. When refueling, first remove the fuel tank cap (counterclockwise rotation), then add fuel, and always observe the oil level gauge on the tank. Do not remove the filler filter when refueling. (When refueling, you must stop the generator and be very careful about the surrounding fireworks.) Do not add oil to the top of the superfilter.
3. Add the specified capacity of four-stroke generator oil to the crankcase. Pull out the oil gauge to check the oil capacity. The oil level should be between the grids of the scales and the state should be in the middle. When filling with oil, remove the black filler cap counterclockwise to inject the oil. After a minute, check the oil level again. There is an oil pressure sensor in the engine. If the engine oil is insufficient, the generator cannot start normally. If the engine oil is excessive, the large gasoline generator cannot work normally. Please drain the excess oil through the drain.
Large gasoline generators must be replaced with new ones after 10-15 hours of running-in. In the subsequent normal use, the replacement of the brand new engine oil should be performed 30-50 hours after use, depending on the use environment and the strength requirements. If the total time of generator use does not exceed 30 hours in half a year, replace the new engine oil once again when using the generator. Every time before starting the generator, it is necessary to check whether the gasoline and oil are filled up to a safe use capacity.

Lamination Machine

Application of lamination machine:

1. Coating and laminating lightweight, foaming material and other special texture materials.

2. Transparent film, color film, or semi-transparent films.

3. Laminating or combination for non-woven fabrics, paper, film, plastic sheet, textiles and a lot of composite material with extra width.

By accumulating nearly 20 years of experience in plastic machinery production technology and manufacture of hundreds of plastic machines, the company developed and produced lamination and multi-layer laminating combination machine, foaming/EPE&XPE/fluffy material laminating line, extra width & ultra width lamination machine, etc. Our technical team has rich experience and high tackling capacity, and the equipment developed by the technical team has stable and reliable quality, excellent index and high flexibility, obtaining the approval and praise of users.

laminating machine



laminating1


FAQ:

Q1: Are you a Manufacture Factory?

No, we are not direct Manufacture Factory, but our factory has been cooperated with Changzhou ZL Machinery since 2000. We are able to offer the most competitive price.

Q2: Installation and commissioning?

We will send our engineer for installation and commissioning. Also, our engineer will train worker until they could produce the product successfully. But, the relevant cost will be paid by you.

Customer demanded is our pursuit. If you have any question about this production line, please contact us directly. We will response you in 24 hours. We are willing to take you visit the factory. For any inquiry, please email us directly.

Lamination Machine,PE Laminating Machine,Film Lamination Machine,Multilayer Lamination Machine

Yangzhou Yuyang Nonwoven Machinery Co., Ltd , https://www.yy-machinery.com