Mold release agent is an interface coating used on the surface of two objects that are easy to adhere to each other. It can make the surface of the object easily detached, smooth and clean. Mold release agents are widely used in various molding operations such as glass fiber reinforced plastics, metal die casting, polyurethane foams and elastomers, injection molded thermoplastics, vacuum foamed sheets, and extruded profiles. In the press molding, sometimes other plastic additives such as plasticizers etc. will seep out of the interface, and a surface release agent is needed to remove it. Most of the release agent is mineral oil or polysiloxane (silicone oil), forming a film between the mold and the workpiece, because the release agent is a very low-intensity inert material, neither with the mold nor with the workpiece, So the workpiece can be easily removed from the mold. In the general forging mold-opening process, the concentration of the release agent is required to be relatively strict, usually the proportion is in accordance with a 100:1 ratio aqueous solution, the diluted concentration range is 0.16%-0.40% , and the measuring instrument is a high-precision refractometer. The concentration of the release agent can directly determine the surface quality of the workpiece in the demoulding process, and can also ensure that the surface of the mold itself will not be damaged during the demoulding process, ensuring the service life of the mold. By ATAGO (Atago) Online glucometer CM-800a have extensive use in the use of the industry, and the coolant line to control the releasing agent concentration in the manufacturing process, the density value can be accurately controlled to the desired mold release Model agent and coolant concentration values, or auto-provisioning during aqueous solution formulation. PRM-100a has a full range of 0-100% to meet the concentration requirements at various points. By ATAGO (Atago) concentration of the 24V supply line, output the analog 4-20mA current signals integrated control system may be used in automated production lines, in order to achieve a truly automated production, true enterprise refinement quantization management system. Applicable product (advantage) CM-800a standard configuration Fully automatic measurement, online measurement of real-time Brix concentration values Host a With automatic temperature compensation 5-100 °C, the temperature range can be extended to -30-150 °C One piece of power cable 1M Measuring range: Brix: 0.0 to 80.0% 4-20mA analog signal line 5M Resolution: Brix: 0.01% ( 0.00-9.99% ), 0.1% ( 10.0-80.0% ) Operating instructions one Measurement accuracy: Brix: ± 0.1 Output: DC4-20MA and 232C interface output Contact with the sample to be measured Material: sample slot SUS316 , prism: sapphire Power Supply: 24VDC International protection class: IP65 The main optional accessories: Pipe Adapter: pi three-way connector Power Adapter : AD-34 Article number ( RE-6651 ) Article number ( 3529 ) Size: Ф50mm 220ACV/24VDC 1 ) Clamp connection type (shown above) 2 ) Threaded type 3 ) Flange connection type Applicable product (advantage) PRM-100a standard configuration Fully automatic measurement, real-time Brix concentration value, refractive index, user-defined concentration display output Host (display means and the detection means) a With automatic temperature compensation, the temperature range up to 100 °C. CIP temperature up to 130 °C Signal cable (display means and the detection signal transmission means) a Measurement range: Brix: 0.00 to 100.00% Refractive Index (ND): 1.32000-1.557000 4-20mA analog signal line 10M Measurement accuracy: Brix: ± 0.05% refractive index (ND ): ± 0.00010 Operating instructions one Measurement accuracy: Brix: ± 0.05% refractive index (ND ): ± 0.00010 Output: DC4-20MA and 232C interface output Contact with the sample to be measured Material: sample slot SUS316 , prism: sapphire Power Supply: AC100-240V , 50/60Hz International protection class: detection part IP66 , display part IP65 Specifications: Testing Parts: 10.8*26.6*10.8cm 3.3kg The main optional accessories: Pipe Adapter Item number Size: Ф50mm 1 ) Clamp connection (shown on the left) 2 ) Threaded connection 3 ) Flange connection Please contact us as soon as possible to build your online concentration detection system and request online concentration monitoring system parameter advice! 
? 
Display Unit: 19.2*10*24cm 3.3kg 