I asked how modern excavators work. Some friends said that modern excavators operate more efficiently and fuel-efficient; some friends say that modern excavators are economical, affordable, and have a good after-sales service; some friends say that modern excavators have a very high value, and accessories are very high. Convenience. It is precisely this one that allows them to feel very deep points, confirms the fact that modern excavators have excellent performance in many aspects. So, what do you think is the most dazzling of the modern R110VS excavator we are talking about today as a “leader” in the small digging?

现代R110VS
Modern R110VS excavator

R110VS is more environmentally friendly, more powerful, faster, and lower fuel consumption

The R110VS is equipped with a new Tier3 engine and uses an advanced "diesel high pressure common rail electronically controlled injection technology" to fully and thoroughly improve diesel combustion performance. The R110VS's multiple fuel filtration system ensures durable engine use while reducing harmful emissions, making it more environmentally friendly. ; R110VS optimized main control valve oil circuit design, improve the working speed and compound operation ability; R110VS loading operation efficiency is higher, the hourly operation volume is bigger, its operation cost is lower, the return rate is higher; R110VS The filter element has been improved to increase the filter capacity and increase the replacement cycle.

R110VS is more efficient and less expensive

The VPC variable power control system used in the R110VS enables variable control of the pilot pressure, ensuring coordinated speed and fuel performance in all operating modes, ensuring high efficiency and low consumption.

现代R110VS挖掘机
Modern R110VS excavator

R110VS has better cooling performance

The R110VS uses a high-capacity, high-efficiency cooling direct-connected fan. The sealing sponge of the cooling module is made of a polyurethane sponge with higher oil resistance and heat resistance, making the R110VS more cooling performance.

R110VS durability shaft, sleeve and resin gasket

R110VS increases shaft and sleeve lubricity, improves wear resistance and prolongs butter injection cycle. R110VS uses a suitable resin gasket to increase side lubricity, prevent wear and abnormal noise, and minimize loosening of operating devices.

微信图片_20170914085030.jpg
R110VS uses a direct-connect fan with high capacity and high efficiency cooling

Longer durability of R110VS structural components

R110VS is equipped with heavy-duty heavy and small arms with better durability. It uses cast steel products to increase strength and improve durability life by 1.5 times. The fuel filter is suitable for pumping rooms and is easily replaced. R110VS uses heat resistance and durability. High Hi-Grade Hose; R110VS muffler outer body is suitable for aluminum plated steel and uses improved heat-resistant paint; R110VS Tuning is optimized to improve compound action impact.

R110VS has a comfortable and safe operating space

In order to reduce the operator's fatigue, provide low-noise operation and enhanced visibility, and create a comfortable operating environment for the driver, we carefully modified the R110VS's cab: 550 → 500mm); 2 Handle angle change (19° → 23°); 3 The driver can adjust the comfort degree of the driver's seat with greater angle according to his own conditions; 4 The digital entertainment equipment and storage box are installed in the driver's cabin. facility.

After reading the introduction of R110VS, which of the texts impressed you? (This article comes from Hyundai Heavy Industries)

Related News: Modern excavator

Gantry Flame CNC Cutting Machine

Advantages and features:
Automatic igniting and tempering control, high efficient and quick. Can be linear single, double - sided a molding groove cutting.
Brand: Buluoer intelligent
Other name: Gantry flame plasma CNC cutting machine
Cutting mode: flame cutting, Plasma cutting
Suit material: carbon steel, manganese plate, galvanized plate, stainless steel, copper steel, aluminium plate etc. metal plate materials.
Product describe:
This CNC equipment is aimed at metal plate materials baiting, not only the appearance of atmospheric but also stable operating, high working efficiency, long service life and it can be achieved cutting all kinds of design graphic. Widely used in various machine building industry of metal sheet cutting.
Product features:
Bilateral drive, high transmission accuracy, operating is stability.
Frame aging treatment, stable structure and non-deformation.
Can remote operation, convenient and efficiency, save labour.
Automatic temper control, safety and efficiency.
Full-automatic StarCAM/ FastCAM graphical editing software, simple nesting.
Flame/plasma dual-purpose cutting system, easy to operate and wide application range.
System has self-compensating, automatic positioning, automatic height-adjustment, break-point memory and automatic recovery function.
Cutting size customization, flame plasma sub-cutting options.

Product parameters

Type

BLDH-3060

BLDH-4080

BLDH-5080

BLDH-60100

BLDH-80100

Track gauge(mm)

3000

4035

5000

6000

8000

Effective cutting width(mm)

2300

3300

4300

5300

7300

Machine width(mm)

3500

4300

5500

6500

8500

Track length(mm)

6000

8000

8000

10000

10000

Number of standard cutting torch(set)

1

2

2

2

2

Input power

AC380V/50Hz;AC220V/50Hz

Lift(mm)

200

Cutting thickness(mm)

Flame cutting:5-150 Plasma cutting:1-30(According to the power supply size)

Cutting speed (mm/min)

Flame cutting:100-1000 Plasma cutting:450-5000

Idle speed

0-8000

Drive mode

Bilateral drive

System

Shanghai Jiaoda or Beijing Starfire

Operating accurancy

±0.5mm


According to the power supply size

LGK-120IGBT

LGK-200IGBT.

No.

Name

Specification parameter

Rrmark

Specification parameter

Rrmark

1

Track gauge

4.0m

Transverse efffective cutting max. 3 m

4.0m

Transverse efffective cutting max. 3 m

2

Track length

8.0m

longitudinal efffective cutting max. 6.5 m

8.0m

longitudinal efffective cutting max. 6.5 m

3

Max. idle speed

9000min

9000mm/min

4

Straight line position accuracy

±0.2min

±0.2mm

5

Straight line position repeat accuracy

±0.3mm

±0.3mm

6

Operating accurancy

±0.5mm

±0.5mm

7

Height controller lift distance

200mm

150mm

8

Flame punch cutting thickness

6-80mm

Carbon steel plate

6-80mm

Carbon steel plate

9

Flama max. Cutting thickness

200mm

Carbon steel plate

200mm

Carbon steel plate

10

Plasma punch cutting thickness

16mm

Stainless steel plate, carbon steel plate

25mm

Stainless steel plate, carbon steel plate

11

Plasma max. Cutting thickness (Edge cutting)

25mm

Stainless steel plate, carbon steel plate

40mm

Stainless steel plate, carbon steel plate

12

Inclination of plasma cutting surface

5-8° (carbon steel plate)

5-8°(carbon steel plate)

13

Roughness of plasma surface

Ra12.5

Ra12.5

14

Roughness of flame surface

Ra25

Ra25

15

Speed of plasma cutting

50-4000mm/min

50-4000mm/min

16

Speed of flame cutting

50-700mm/min

50-700mm/min

17

Drive mode

Bilateral drive

Bilateral drive (panasonic servo)

18

Number of cutting torch

CNC flame cutting torch: 1, plasma cutting torch: 1

CNC flame cutting torch: 1, plasma cutting torch: 1

19

Equipment accurancy

Conformed or superior to ISO8206-1991, JB/T10045.3-1999

Conformed or superior to ISO8206-1991, JB/T10045.3-1999


Flame plasma CNC cutting machine


Basic Equipment


No.

Name

Distribution

Unit

Quantity

Remark

1

Type specification

BLDH4080

set

1

Beam annealing

2

Drive mode

double-drive

set

2

Panasonic servo

3

Drive reducer

AEVELE

set

2

Taiwan

4

CNC

F2300TB

set

1

Shanghai Jiaoda

5

FASTCAM

Fast CAM Chinese version

set

1

Guoyou

6

Flame cutting torch

Wuxi Xiangzheng

set

1

Guoyou

7

Plasma power

Chengdu Huayuan LGK200

set

1

Huayuan

8

Arc voltage regulator

Shanghai Jiaoda

set

1

system-provided

9

Automatic ignite device

Wuxi Xiangzheng

set

1

Guoyou

10

Precision track

24 kg

m

8*2

Wuxi

11

Precision rack

Straight tooth

m

6*2

Wuxi

12

Pulley

Nylon chain

set

1

13

Lift body

2K2M

piece

2





Technical requriments


No.

Name

Distribution

Remark

1

Width of machine tool

4000

2

Effective cutting wideth

3100

3

Track gauge

3710

4

Idle speed

0~8000 mm

5

Flame cutting thickness

5~200 mm

6

Plasma punch cutting thickness

25mm

user demand

Plasma max. Cutting thickness

45mm

user demand

7

Effective length

6500 mm

8

Cutting torch journey

≤150 mm

9

Accurancy

± 0.5 mm

10

Track length

8m

11

Input power

AC220V/380V 50HZ

12

automatic height-adjustment

Jiaoda arc voltage height-adjustment

13

Cutting material

Stainless steel plate, carbon steel plate

Cutting samples

9


Flame Cutting Machine,Plasma Cutting Equipment,Copper Cnc Cutting Machine,Cnc Plasma Slab Cutting Machine

Shandong Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachine.com